H20 Beam Formwork For Concrete Walls And Columns Upto 6 Meters Height
HORIZON's H20 beam formwork consists of H20 wooden beam, steel walings and other connecting parts. These components can be assembled formwork panels in different widths and heights, depending on the H20 beam length up to 6.0m.
Main components:
The H20 beam is the basic component of all the elements, with nominal lengths of 0.9 m up to 6.0 m. It has an extremely high load-bearing capacity with a weight of only 4.80 kg/m, which results in fewer walings and tie positions. H20 timber beam can be applied to all wall heights and elements are assembled together appropriately according to each specific project.
Steel walings required are produced in accordance with specific project customized lengths. The longitudinally-shaped holes in the steel waling and waling connectors result in continuously variable tight connections (tension and compression). Every waling joint is tightly connected by means of a waling connector and four wedge pins.
Panel struts (also called “Push-pull prop) are mounted on the steel waling, helping formwork panels erection. The length of panel struts are selected according to the height of the formwork panels.
Using the top scaffold bracket, working and concreting platforms are mounted to the wall formwork. It consists of: top scaffold bracket, planks, steel pipes and pipe couplers.
| Components | Diagram / photo | Specification / description |
| Wall formwork panel |  | For all vertical formworks |
| H20 Timber beam |  | Water proof treated
Height: 200mm
Width: 80mm
Length: as per table size |
| Steel waling |  | Painted, powder coated
[12 steel channel
|
| Flange clamp |   | Galvanized
To connect steel waling and H20 beams |
| Panel strut |  | Painted
help formwork panel erection |
| Waling connector 80 |  | Painted
Used for formwork panels alignment |
| Corner connector 60x60 |  | Painted
Used for forming inner corner formwork with wedge pins |
| Top scaffold bracket |  | Painted,
severs as safety working platform
|
Product Tags:
|
|
H20 Beam Formwork For Concrete Walls And Columns Up To 6 Meters Height Images
|
